Nominal
inch
- 1/4
- 3/8
- 1/2
- 3/4
- 1
- 1¼
- 1½
- 2
- 2½
- 3
- 4
- 5
- 6
- 8
VIPERFLEX
CORRUGATED HOSE
VIPERFLEX CORRUGATED HOSES OFFER COST EFFECTIVE SOLUTIONS FOR LIQUID TIGHT APPLICATIONS.
AVAILABLE WITH EXTERNAL BRAIDING TO PROTECT AGAINST MECHANICAL DAMAGE.
Corrugated Hose
| Corrugated Hoses are specially developed with precision and utmost reliability and rigorously tested to meet all requirements and demands such as pressure, temperature, media, flexing requirements and environment. | |
| Corrugated Hoses are manufactured by longitudinally welding strips to obtain thin wall tubes which are then hydraulically corrugated by means of special tools. The combination of flexibility and pressure resistance is achieved by a row of annular corrugations each of which is capable of elastic deformation. | |
| To increase pressure resistance and to provide protection against mechanical damage where necessary, corrugated metal hoses are provided with a single or double wire braiding. | |
| 100% testing on all hose assemblies are rigorously carried out prior to despatch to meet Viperflex quality standards. Burst pressure testing and leak testing procedures are carried out to ensure joint integrity of hose-to-end fitting connections. | |
A range of END FITTINGS are available HERE
Single Braided Corrugated Hose
Bore
mm
- 6
- 10
- 13
- 19
- 25
- 32
- 38
- 51
- 64
- 76
- 102
- 127
- 152
- 200
Maximum Working Pressure
lb/in² Bar
- 2300 / 160
- 2000 / 138
- 1500 / 103
- 900 / 62
- 750 / 52
- 600 / 42
- 550 / 38
- 500 / 34
- 450 / 31
- 400 / 27
- 250 / 17
- 230 / 16
- 145 / 10
- 90 / 6
Maximum Test Pressure
lb/in² Bar
- 3450 / 240
- 3000 / 207
- 2250 / 154
- 1350 / 92
- 1125 / 78
- 900 / 62
- 825 / 57
- 750 / 51
- 675 / 46
- 600 / 42
- 375 / 25
- 350 / 24
- 220 / 15
- 135 / 9
Minimum Bending Radius
MBR mm+10%
- 3.5 / 89
- 3.75 / 95
- 4 / 102
- 5 / 127
- 6 / 152
- 7 / 178
- 10 / 254
- 14 / 356
- 18 / 457
- 20 / 508
- 24 / 610
- 29 / 737
- 35 / 890
- 39 / 980
Double Braid
Nominal
inch
- 1/4
- 3/8
- 1/2
- 3/4
- 1
- 1¼
- 1½
- 2
- 2½
- 3
- 4
- 5
- 6
- 8
Bore
mm
- 6
- 10
- 13
- 19
- 25
- 32
- 38
- 51
- 64
- 76
- 102
- 127
- 152
- 200
Maximum Working Pressure
lb/in² Bar
- 4000 / 275
- 3200 / 221
- 2500 / 176
- 1600 / 10
- 1300 / 90
- 1000 / 69
- 750 / 52
- 700 / 48
- 600 / 41
- 550 / 38
- 300 / 20
- 280 / 19
- 220 / 15
- 145 / 10
Maximum Test Pressure
lb/in² Bar
- 6000 / 412
- 4800 / 331
- 3800 / 261
- 2400 / 165
- 1950 / 135
- 1500 / 103
- 1125 / 76
- 1050 / 73
- 900 / 62
- 825 / 57
- 450 / 30
- 420 / 28
- 325 / 22
- 220 / 15
Minimum Bending Radius
MBR mm+10%
- 3.5 / 89
- 3.75 / 95
- 4 / 102
- 5 / 127
- 6 / 152
- 7 / 178
- 10 / 254
- 14 / 356
- 18 / 457
- 20 / 508
- 24 / 610
- 29 / 737
- 35 / 890
- 39 / 980