VIPERFLEX DOUBLE LOCK STRIP WOUND HOSE
VIPERFLEX DOUBLE LOCK STRIP WOUND HOSES PROVIDE SOLUTIONS FOR ENVIRONMENTS REQUIRING MORE PROTECTION THAN OUR STANDARD SQUARE LOCK STRIP WOUND HOSES.
DIFFERENT CONSTRUCTIONS ARE SUITED TO DIFFERENT APPLICATIONS. CONTACT OUR SALES TEAM FOR ADVICE.
Double Lock Strip Wound Hose
Stainless Steel DLRUC - available in diameters from 5mm to 51mm, this conduit is highly flexible and lightweight, suited to similar applications to the SLRU square lock armour but offers a higher crushing load, tensile load and bending load.
Stainless Steel DLRUH - available between 20mm and 300mm ID, DLRUH is a little heavier in weight than DLRUC and offers a little more bend radius. This hose is used in applications including engine exhaust, conveying wood chips, sugar granules and high viscosity fluids. It is also suitable as a liner to stainless steel annular corrugated hoses and many more applications where the temperature is high and corrosion resistance is needed.
Stainless Steel DLPUH - this hose has a polygonal cross section, in contrast with the circular cross section of other double lock armour:
Whereas circular strip wound hoses have a tendency to change slightly in diameter when cut, polygonal hoses offer a precise and constant size. The DLPUH is mainly used in engine exhausts and is available in lengths up to 400mm.
Stainless Steel DLRP
ALL DOUBLE LOCK STRIP WOUND HOSES CAN BE SUPPLIED IN CUT LENGTHS TO YOUR REQUIREMENT OR ON COILS
Technical information is available in the pages below. Contact our sales team for advice and further information (Tel: +44(0)1189 739498, Email: firstname.lastname@example.org)
- Stainless Steel Double Lock Strip Wound Hose DLPUH