VIPERFLEX SQUARE LOCK STRIP WOUND HOSES
VIPERFLEX SQUARE LOCK STRIP WOUND HOSES PROVIDE SOLUTIONS FOR ENVIRONMENTS WITH NEGLIGIBLE REQUIREMENTS.
DIFFERENT CONSTRUCTIONS ARE SUITED TO DIFFERENT APPLICATIONS. CONTACT OUR SALES TEAM FOR ADVICE.
Square Lock Strip Wound Hose
Stainless Steel SLRU - available in diameters from 4mm to 52mm, the square lock profile is designed for metal hoses which have to withstand negligible requirements.
Stainless Steel SLRP - contains packing inside the lock, providing insulation for the passage of engine exhaust hot, cold air and steam. Available packing materials include rubber, PVC, cotton thread, stainless steel wire, MS copper coated wire, copper wire and silicon rubber.
Stainless Steel SLRUE - insulated with a PVC extruded cover, SLRUE can be used for the protection of cables/wires where a smooth surface is required and can also be used as liquid tight hose because the PVC sheath becomes leak proof at normal pressure, useable with air, water, steam and oil. However, a pressure rating is not recommended for this hose.
Stainless Steel SLRUB - manufactured with a stainless steel overbraid, SLRUB can be used for the protection of cables/wires where a smooth surface is required however external braiding does not offer liquid tightness.
ALL SQUARE LOCK STRIP WOUND HOSES CAN BE SUPPLIED IN CUT LENGTHS TO YOUR REQUIREMENT OR ON COILS
Technical information is available in the pages below. Contact our sales team for advice and further information (Tel: +44(0)1189 739498, Email: firstname.lastname@example.org)